Inventory Unit Detail

Honda Power Equipment WB20 Water Pump(164 Gallons Per Minute / 2" NPT)

$549.00

$549.00

Key Features

New/Used New
Availability In Stock
LocationWest End Power Equipment Co.
Stock # QHO / 03-WB20XT4A - 662190
Condition Excellent

Product Features

Description

2" general purpose water pump

Key Features
  • 164 gal./min. capacity
  • Durable silicon carbide mechanical seal
  • Cast iron volute and impeller
Features
  • Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • Durable silicon carbide mechanical seal: The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
  • 4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
  • Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.
  • Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • Protected by Honda Oil Alert®: Protects the pump by shutting the engine off when low oil is detected.
  • 3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
  • Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Specifications
  • Engine: GX120
  • Displacement: 118cc
  • Bore and stroke: 2.4 in. x 1.7 in.
  • Compression Ratio: 8.5:1
  • Oil Alert: Std
  • Pump Type: Centrifugal, Self-priming
  • Volute: Rigid Mounted Cast Iron
  • Impeller: 4 Vane Cast Iron
  • Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
  • Priming time: 110 sec @ 16.4 ft.
  • Drive system: Direct
  • Discharge capacity: 164 gpm
  • Suction port diameter: 2 in. NPT
  • Discharge port diameter: 2 in. NPT
  • Total head lift: 105 ft.
  • Suction head lift: 25 ft.
  • Maximum pressure: 45 psi
  • Solids handling: N/A
  • Dimensions (LxWxH): 19.3 in. x 14.4 in. x 16.5 in.
  • Dry weight: 44 lb.
  • Fuel Capacity: 0.53 gal
  • Run Time @ Max Discharge: 1.7 hr
  • Strainer Part #: 78325-YG3-000
  • Residential Warranty: 3 years
  • Commercial Warranty: 3 years
  • CA Compliant: Yes
NOTES:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Engine

Engine Manufacturer Honda
Engine Displacement 118cc
Bore and Stroke 2.4 in. x 1.7 in.

General

Pump Style Centrifugal, Self-priming
Impeller 4 Vane Cast Iron
Drive System Direct
Discharge Capacity 164 gpm
Discharge Port Diameter 2 in. NPT
Suction Diameter 2 in. NPT
Head Lift 105 ft.
Suction Head Lift 25 ft.
Max Pressure 45 psi
Weight 44 lb.

Shopping Tools